Working mode
Long press the switch for 2 seconds, the blue light flashes 3 times, enter Mode 1 (infrared timing mode).
The blue light goes off and sleeps for 30 minutes when the infrared sensor is not triggered. After 30 minutes, the blue light is always on for 30 seconds, during which active oxygen is released.
If the infrared sensor is triggered, the blue light continues to flash. After the human body leaves for 1 minute, it starts to release active oxygen for 30 seconds. At the same time, the blue light is always on for 30 seconds. After the release, it starts to sleep again for 30 minutes, and the blue light goes out, so reciprocating.
During Mode 1, press the switch briefly, the green light flashes three times, and enter Mode 2 (timing mode).
The green light goes off and sleeps for 30 minutes; After 30 minutes, the green light is always on for 30 seconds. During this period, active oxygen is released. After the release, sleep starts again for 30 minutes. The green light goes off, so reciprocating.
In any mode, press the switch for 2 seconds to shut down, and the red color flashes three times.
If the red light is always on, the battery is insufficient or charging.
Suggestions for use: stick foam tape on the raised metal patch, and then stick it on the top of the toilet or near other odour sources to absorb the machine on the metal patch.